Sign in or Register
 

MAX6675 Module + K Type Thermocouple Sensor, MOD-6675K

Previous 4 / 12 Next

MAX6675 Module + K Type Thermocouple Sensor, MOD-6675K Sensor Modules Hobby / Education Development Kits Development Boards & Evaluation Kits
RM 45.00
In Stock


This thermocouple is designed with fork terminals. Specially designed for digital thermometer which has k type sensor, suitable for measuring liquid or others high-temperature applications. The MAX6675 performs cold-junction compensation and digitizes the signal from a type-K thermocouple. The data is output in a 12-bit resolution, SPI™-compatible, read-only format.

 

Specification:

  • Easy installation

  • Working Voltage: DC 5V

  • Operating Current: 50mA

  • Probe temperature measurement range: 0° - 600 °C ± 1.5 °C

  • Probe length: 500mm

  • Resolution: 0.25 °C

  • Output Mode: SPI digital signal

  • Weight: 4g

  • Size: 25mm * 15mm * 13mm


Package included :
1 x MAX6675 Module

 

How to interface MAX6675 Module and K Type Thermocouple with Arduino Uno?

 
K type Thermocouple

Hardware and Software Required

  • MAX6675 Module and K Type Thermocouple
  • Arduino Uno
  • Arduino IDE

Hardware Connections

The K-type thermocouple should be connected to the MAX module and the MAX6675 module should be connected to Uno as follows:

  • Vcc to 5V
  • Gnd to Gnd
  • SCK to digital pin 6
  • CS to digital pin 5
  • SO to digital pin 4

Program for MAX6675 Module and K Type Thermocouple

The user need to download and add the library file which is attached here:File:MAX6675-library-master.zip.Now upload the program given below and open the serial monitor to check the output.The user will get output in degree Celsius and Fahrenheit as shown in the image.

Max Output.jpg
#include "max6675.h"
int thermoDO = 4;
int thermoCS = 5;
int thermoCLK = 6;
MAX6675 thermocouple(thermoCLK, thermoCS, thermoDO);
void setup() {
 Serial.begin(9600);
 Serial.println("MAX6675 test");
 // wait for MAX chip to stabilize
 delay(500);
}
void loop() {
 // basic readout test, just print the current temp
   Serial.print(" temperature in C = "); 
  Serial.println(thermocouple.readCelsius());
  Serial.print("temperature in F = ");
  Serial.println(thermocouple.readFahrenheit());
   delay(1000);
}

References

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

New Products:
You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version