Sign in or Register
 

NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius),MOD-TS

Previous 6 / 12 Next

NTC Themistor Module LM393 (Temperature up to 80 Degree Celsius),MOD-TS Sensor Modules Hobby / Education Development Kits Development Boards & Evaluation Kits
RM 13.00
In Stock


Download Files

NTC_Sample_Source_Code.zip (476 Byte)
This NTC thermistor module has an NTC temperature sensor which gives an only digital output that allows you to easily add over-temperature and under-temperature condition sensing capabilities to your new project. The temperature detection threshold is adjustable via a potentiometer. It uses the LM393 based voltage comparator chip which features a clean and stable digital output signal and a driving ability of 15mA.

The DO output can be directly connected to the microcontroller, and it outputs a high or low-level voltage depending on the temperature changes from the environment.

The DO output can be used directly drive a relay module or as a thermostat switch for controlling external equipment, such as a cooling fan.


Features :

  • NTC Thermistor sensor
  • LM393 voltage comparator
  • Mounting hole for easy installation
  • Adjustable threshold via potentiometer

Specification :

  • Operating Voltage: 3.3V DC to 5V DC
  • Output Current: 15mA
  • Output Type: Digital (HIGH OR LOW)
  • PCB Size: 32 x 14mm
  • Temperature Range: 20°C - 80°C

Package Include:

  • 1x LM393 Thermal Sensor Module


Step 1: Introduction

Description:

Thermistor Sensor Module is used to sense temperature and convert it into output signals. It is associated with both analog output pin and digital output pin labelled as AO and DO respectively on the board. Thermistor Sensor Module is made of semiconductor materials. Basically thermistor sensors are mostly Negative Temperature Coefficient (NTC), which means NTC thermistors will have their electrical resistance decreased when subjected to an increase in body temperature. This module has a potentiometer knob that can be adjusted to change the sensitivity of thermistor towards temperature.

Specifications:

  • Input Voltage: DC 3.3V to 5V
  • Output: Analog and Digital
  • Sensitivity Adjustable
  • Size: 32mm x 14mm x 5mm
 

Step 2: Pin Definition

Picture of Pin Definition
Picture of Pin Definition
 

Step 3: Sample Hardware Installation

Picture of Sample Hardware Installation

Step 4: Sample Source Code

To get the result, please download the sample source code attached on top and upload it into Arduino.


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

New Products:
You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version